BISSELL POWERFORCE HELIX TURBO REWIND FULL
BISSELL POWERFORCE HELIX TURBO REWIND PLUS

Pre-motor filters: There are two filters, one carbon and one foam, found on the top of the dirt compartment, both of which can simply be pulled free.No specific maintenance interval is given, but you should clean the roller as needed since it tends to collect a lot of long hair. You can also remove the brushroll belt if you want to check if this part has been damaged or stretched, and you can pull or cut out hair tangled around the brush. Brushroll: The brushroll is a bit of a hassle to take out, as you first have to remove six Phillips screws and the brushroll plate.

BISSELL POWERFORCE HELIX TURBO REWIND PLUS

You can wash the cyclone cylinder with warm water plus a mild detergent, but you need to let it dry for 24 hours before using it again.

It opens from the bottom so you can empty dirt or the cyclone cylinder.

Dirt compartment: The dirt compartment is easily removable.

This vacuum has quite a few parts that need to be cleaned periodically. We've purchased the product and are waiting for it to arrive in our lab. The product has arrived in our lab, and our testers will start evaluating it soon. Our testers have started testing this product. Lowered 'Cracks' score to maintain consistency with similarly-performing vacuums. The test results for the 'Maximum Suction' and 'Normal Suction' fields have been updated. This vacuum's suction force has been retested with a more accurate manometer. We've included a link to the Dirt Devil Endura Max vacuum review in the 'Portability' section to provide an example of an alternative that isn't quite as heavy.

BISSELL POWERFORCE HELIX TURBO REWIND FULL

We've changed the full product name to 'BISSELL CleanView Swivel' in order for the review to encompass all model variants. We've changed the product name to 'BISSELL CleanView/CleanView Swivel Pet Rewind' for the review to encompass all model variants and updated the 'Introduction', ' Quality Of Life Features', ' Maneuverability', ' Tools And Brushes', and ' Storing' sections to outline the differences between models. Remove any debris.We've updated the text in the review to account for the new tests and scoring methodology in Vacuum Test Bench 1.0 and Vacuum Test Bench 1.1. Remove the screw from the foot hose and check for clogs.Ĭheck the air passageway on the bottom of your vacuum. Remove any debris that may have gotten clogged. To clear a clog, remove the hose from the back of the vacuum by twisting it to the left. Once the brush roll is reinstalled, place the bottom cover back on and replace the screws. Line up the end caps and pull the brush roll. Replace the brush roll and belt by looping the belt over the motor shaft and brush roll. Pull the roller straight out, threading it through the belt. Turn the unit over and unscrew the 5 Phillips head screws to remove the bottom cover. To replace the brush and belt, turn the vacuum off and unplug. Rinse and dry all sections of the dirt container with paper towel. Remove the separator by twisting to the left and removing. To clean your separator, the dirt container must be removed. Allow filters to dry completely before reinserting.

Press the filter cover release button to access the post motor filter.Ĭlean all the filters with mild detergent, rinse, and squeeze all excess water. To access your post motor filter the dirt container must be removed. Once it's clean and dry, place it back in the dirt container lid. Remove the pre motor filter and pull the filter out to clean. To clean the pre motor filter, open the dirt container lid by lifting the release latch on the front. Once empty, snap the bottom back into place. Holding Dirt container over a trash bin, press the release button on the back. Pull the handle to push the Dirt container away from the vacuum. To empty your dirt container, press the empty button. The faceplate will not close properly if all the parts are not aligned correctly. If the paddle wheel gets dislodged, align the two clips on each side and pop it into place. Once the slot appears, separate the faceplate. To clean your TurboBrush, twist the gray collar counter-clockwise. It is important to perform various maintenance practices to maintain optimum performance for your machine.

Bissell powerforce helix turbo rewind